8
Select from the following options:
Options: [Cancel] / [Delete]
Delete the current
photo or video
Press OK to confirm
Options: [Cancel] / [Delete]
Delete all files
Delete all photo and video
files saved on the memory
card.
Press OK to confirm
Playback the photos in
slide way.
Each photo display 3 sec.
Activate slide show
Press OK button to stop playing.
Lock the file. It can avoid
accident deletion.
Options:
[Write-protect
current file] / [Write-protect
all files] / [Unlock current file]
/ [Unlock all files].
Write protect
Select and press OK button to confirm.
Working Mode
Switch the Mode Button to “On”. After turn on the camera, the screen will
display 15 seconds countdown. Then the LEDs and screen will go out. The
camera begins to operate independently and enter standby mode.
If the wild animals enter the detection range of the motion sensors, the
camera will be activated and detect the motion trail. If the wild animals
continue to move to the detection zone of the sensor, the camera will take
photos or record video automatically.
When the wild animals leave the detection zone of the sensors, the camera
will be deactivated and turn back to standby mode.
Night Mode
During the night, the infrared LEDs will turn on automatically, to provide
necessary light for taking pictures/videos. This makes it is possible to taking
picture at a distance about 3–18m without overexposing the night.
However, reflective objects such as traffic signs can cause overexposure if
they are located within the recording range. In night mode, the pictures just
can display white and black. When record a video for long time in the evening,
the low voltage may have a great influence on the stability of the machine.
Attention: Do not record video with low battery voltage in the evening.
