USING CLEANY TEETH FOR THE FIRST TIME
The Cleany Teeth toothbrush is intended for your dog, in the case of several
dogs we recommend the purchase of one device per dog for hygienic reasons.
The brush heads and neck are designed so that they should be changed every
three months. It is not intended to change the head constantly – this would
eventually weaken the neck.
The Cleany Teeth’s battery has been pre-charged at the factory, so you can use
the device immediately out of the box.
Charging the Cleany Teeth ultrasound unit
To charge the Cleany Teeth device, connect it with the charging cable to any USB
charger. You can use the charger of your smartphone (e.g. iPhone, iPad or An-
droid) or the USB output of your laptop computer.
When charging, the yellow LED flickers on and off. As soon as the battery is
fully charged, the green LED lights up permanently as long as the micro-USB
plug of the charger is connected to the charging socket of the toothbrush (see
pages 15 and 17).
Switching the unit on and off
Press the on/off switch once to turn on the unit (in vibration mode), press the
ON/OF switch twice rapidly to enable the vibration-free mode of Cleany Teeth
The blue LED light goes on; it indicates that the device is on and working
correctly (= ultrasound is generated). The hand piece starts to vibrate.
For safety reasons, the unit switches itself off after three minutes. You can turn
it on again for another three minutes.
• Press the switch again to deactivate the device.
• If the yellow LED flashes, you should charge the Clea-
ny Teeth to continue using it.
• Blue light signals that ultrasound is generated.
• Timer: The device signals the cleaning time after 60 and
120 seconds by vibration and LED signals.
15
14
CHARGING VIA USB PORT
Almost all chargers / power supplies of mobile phones and smart-
phones (e.g. iPhone or Android) and tablet computers with micro USB are
suitable..
The charger / power supply must have an output voltage of 5 volts DC and
be able to supply 1 ampere (1A) or more current. For your own safety,
make sure that the charger/power supply used complies with the SELV
standard (indicated by the printed symbols
or
) other than the
above, must NOT be used.
3
3
HOW DO I CHARGE THE BATTERIES?
2
1
2
It takes an average of four to eight hours to fully charge the battery.
With a fully charged battery, the device operates for an average of one
month if used twice a day.
4
1
Quickstart ››
