EN
10
COnnECtIOn
H D M I d i s p la y
Connection instruction:
1) Connect HDMI input with HDMI source device and connect IR
blaster extension cable with IR OUT interface of the sender (TX).
2) Connect HDMI output with HDMI display device and connect IR
receiver extension cable with IR IN interface.
3) Power on the device (power led lights) and it works.
note:
1) When the wireless signal transmits through wall, glass or other
obstacles, it will cause signal loss. Please install this device in
good environment with few obstacles.
2) The external environment wireless signal interference the
transmission, such as micro waver, wireless mouse and keyboard,
etc.…
FAq
q:
Transmitter and receiver can’t be connected with each other?
A:
1) Please check if the wireless connection light on product blinks
properly.
2) Restart the transmitter or receiver.
3) Reconnect the HDMI cable.
q:
The Wi-Fi LED indicator of the transmitter is off, but no signal
output on display/monitor?
A:
1) Please check if there is a HDMI signal input of sender TX.
2) Try to connect the signal source directly to display device to see
if there is signal output from source device or change the signal
source, HDMI cables and try again.
q:
Display not fluent and stable?
A:
1) Please move the position of the sender (TX) and receiver (RX)
and make sure the device is within the required signal range.
2) Restart the transmitter or receiver.
3) Reconnect the HDMI cable.
4) Remove other wireless signal disturbance and reduce the ob-
stacles on the way.
HDMI Wireless Extender
