HDMI SPLITTER/EXTENDER OVER
SINGLE CAT5E/6 WITH IR
7
EN
HDMI EXTENDER OVER SINGLE CAT5E/6 WITH IR
Dear Customer
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
IMPORTANT SAFETY INSTRUCTION
INTENDED USE
We do not permit using the device in other ways like described in this user’s manual.
Use the product only in dry interior rooms. Not attending to these regulations and
safety instruction might cause fatal accidents, injuries, and damages to persons and
property. The manufacturer/supplier assumes no liability for damages caused by
failure to comply with the intended use.
To reduce risk of electric shock, this product should ONLY
be opened by an authorized technician when service is
required. Disconnect the product from mains and other
equipment if a problem should occur. Do not expose the product to water or moisture.
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• Your product is not a toy and is not meant for children, because it contains small parts which can
be swallowed and can injure when used inappropriately!
• Please install the system and devices attached to it in a way that persons cannot be injured, or
objects not be damaged for example by dropping or stumbling.
• Please remove the packing materials, because children may cut themselves on them while playing.
Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.
• Avoid places with high temperatures, or humidity, or places which might come into contact
with water. Do not install the product close to openings of air conditioners, or at places with an
excessive amount of dust or smoke.
• Do not install the product at places subject to vibration, or oscillation.
• Do not modify and alter the product and any accessories! Do not use any damaged parts.
• Keep enough space around all devices for a good ventilation and free motion and to avoid
damages.
• Incorrect placement of sender and receiver may result in the failure of the installation.
• Incorrect placement of IR blaster and receiver may result in the failure of the IR Extenders.
• Do not unplug the device when it is in using, keep distance from inflammable and explosive
devices.
• Use only power adapter and power cords and connection cables designed for this unit. Make sure
the specification matched if using 3rd party DC adapters.
• Do not mix up the HDMI EXTENDER sender and HDMI EXTENDER receiver, and the IR blaster and
IR receiver.
Summary of Contents for IDATA EXTIP-383IR
Page 12: ...www techly com ...
