Vanguard wiring
harness KB-951
MANUAL
Seite/von:
Dokument:
Stand:
Revison:
1/4
9021-0107-A
02.06.2023
A
TABLE OF CONTENT
2.1 Overview....................................................................................................................................................................................1
2.2 How to connect.........................................................................................................................................................................2
3. Appendix......................................................................................................................................................................................4
3.1 Specification..............................................................................................................................................................................4
3.2 Electrical....................................................................................................................................................................................4
3.2.1 Environmental conditions.......................................................................................................................................................4
3.2.2 Weight and dimensions..........................................................................................................................................................4
SAFETY INSTRUCTIONS
This manual contains notices which you should observe to
ensure your own personal safety, as well as to protect the
product and the connected equipment. These notices are
highlighted in the manual by a warning symbol and are
marked as follows according to the level of danger:
Only qualified personnel should be allowed to install and
work on this equipment.
Qualified persons are defined as persons who are
authorized to commission, to ground and to tag circuits,
equipment and systems in
accordance with established safety practices and
standards.
Turn off the power supply before
performing any wiring operations!
Short circuits can be harmful, critical and can cause
explosions and serious burns!
Please read this manual carefully and observe all safety
instructions!
DESTINATED USE
The Vanguard Wiring Harness is intended exclusively for
commissioning the Vanguard FI battery pack series.
DISCLAIMER
BARTH
®
assumes no liability for usage and functionality
of wiring harnesses in case of disregarding this manual.
The strict accordance of this manual is important since
the installation methods, peripheral connections, usage
and maintenance can not be controlled by BARTH
®
.
Therefore BARTH
®
assumes no liability for any claim.
1. Product Features
IP-67
Automotive quality
Plug and Play
Enables charging and discharging
Engineered and manufactured in Germany
2. Harness installation
The Vanguard wiring harness is intended exclu-
sively for use with the Vanguard Lithium-ion bat-
teries of the FI series. It must be installed in such
a way that it is protected from the risk of fire, en-
vironmental influences and mechanical influ-
ences.
2.1 Overview
© 2023 BARTH Elektronik GmbH | Im Depot 1-3 | D-49838 Lengerich | www.barth-elektronik.de | [email protected]
® BARTH and lococube are registered trademarks of BARTH Elektronik GmbH. All rights reserved to make changes without prior notice.
