WWW.TECHLY.COM
HDMI EXTENDER OVER
CAT.6/7 CABLE WITH EDID
EN - 7
IR USER GUIDE
1) IR blaster extension cable should plug in the IR OUT port of the transmitter or receiver, IR receiver
extension cable should plug in the IR IN port of the transmitter o receiver
2) The emitter of the IR blaster extension cable should be as close as possible to the IR receiver
window of the signal source device
3) Face the receiving head of the IR receiver extension cable to the user for convenient remote
control
FAQ
Q: There is no output on screen when all corrections are correct
A:
1) Please make sure the HDMI cables support the resolution of the output signal from the source
device
2) Please check and make sure the network cable inserts to the RJ45 port well
3) Restart the transmitter or receiver by pressing the rest button
Q: Black screen happened on the display/monitor
A:
1) Check if the length of the cable is within the specified range
2) Reset the transmitter to re-built the connection
Q: The display shows unusual color or not sound
A:
1) Reset the transmitter or receiver to re-built the connection
2) Check if the HDMI cables are connected well
3) Reconnect the network cable
