• Do not mix up the HDMI EXTENDER sender and HDMI EXTENDER
receiver, and the IR blaster and IR receiver.
• Power supply: DC 5V, usage only the supplied power unit, do not
use the power supply if it is damaged. Make sure the specification
matched if using 3rd party DC adapters.
INTRODUCTION
HDMI extender, extends your HDMI video/audio with the resolution of
4Kx2K 30Hz up to 120m (394 feet) via single network cable. Supports
IR signal transmission, to control media playback of the signal source
device at the display location.
FEATURES
• Supports resolutions up to 4Kx2K@30Hz
• Transmits HDMI signal over single CAT5/5e/6 cable
• Extends up to 394 feet (120 meters) at 4Kx2K@30Hz
• Connects with routers to split and extend unlimitedly
• Compatible with existing network, not affect Internet
• Supports IR signals pass back to easily control from far distance
(20kHz to 60kHz)
• Support LAN transmission to build network flexibly
• High-end aluminium alloy enclosure design
• Compatible with HDMI V1.4 and HDCP 1.4
PACKAGE CONTENTS
• HDMI EXTENDER sender TX x 1pc
• HDMI EXTENDER receiver RX x 1pc
• User manual x 1pc
• IR Blaster extension cable x 1pc
• IR receiver extension cable x 1pc
• DC5V/2A x 2pcs
Note:
above accessories are contented in the regular package for the
kit with transmitter and receiver. If buy HDMI Extender TX or HDMI
Extender RX separately, the package contents would be different.
INSTALLATION REQUIREMENTS
1. HDMI source device (computer graphics card, DVD, PS3, HD
monitoring equipment, etc..)
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. Network cables: UTP/STP Cat5e/6 networking cables, which
following the standard of IEEE-568B
Transmission length:
CAT5 80m/CAT5E 100m/CAT6 120m
EN - 3
WWW.TECHLY.COM
4KX2K HDMI
EXTENDER
