8
TL-SM3X1-HDV User Manual
www.tlnetworx.com
6.
Connect a VGA signal cable between the VGA sources and the VGA IN ports.
7.
Connect an HDMI cable between the display and the HDMI OUT port.
8.
If the 3x1
video switcher will be controlled via TechLogix table inserts:
1)
Separately connect HDMI signal cables between the HDMI sources and HDMI
ports of the table inserts.
2)
Separately connect a VGA signal cable between the VGA source and the VGA
port of the table insert.
3)
Separately connect HDMI signal cables between the HDMI ports of table inserts
and the HDMI IN 1 and HDMI IN 2 ports of the TL-SM3X1-HDV.
4)
Seperately connect a VGA signal cable between the VGA port of the table insert
and the VGA IN port of the TL-SM3X1-HDV.
5)
Separately connect three table inserts to the C1, C2, and C3 ports of the TL-
SM3X1-HDV.
9.
Connect the included 12VDC power adaptor to the TL-SM3X1-HDV.
10.
Power on attached audio/video devices.
Important notice:
l
Do not attempt to disassemble or alter the TL-SM3X1-HDV housing. There are no
user-serviceable parts inside the unit. Doing so will void your warranty.
l
To minimize the possibility of equipment damage from electrostatic discharge (ESD),
all source and destination equipment must be powered off during installation.
l
Allow proper ventilation to reduce the risk of thermal failure.
