www.tlnetworx.com
TL-DA14-F2 User Manual
3.
System Connection
1. Using quality HDMI cables, connect an HDMI source (such as Blu-ray, games
console, satellite/cable TV, media server etc.) to HDMI In of the TL-DA14-F2.
2. Connect the HDMI outputs to HDMI sinks (TVs, projectors, etc).
3. Connect the included 5V power supply to the TL-DA14-F2.
4. Check that the Power, Signal, and Output lights are illuminated to indicate
successful connection.
5. Booyah!
4. Mode Selection
The TL-DA14-F2 has [4] 2-position DIP switches labelled “EDID” on the front panel.
These switches are used to select the EDID* and operating modes. The switches are
labelled 1~4 from left to right, and the switch should be in the down position to be
considered ‘ON’. After changing the switch positions, please power cycle the TL-
DA14-F2 for the new settings to take effect.
*EDID – Extended Display Identification Data is metadata that is passed from the
display to the source in order to ‘request’ compatible video and audio formats from the
source. Since the TL-DA14-F2 may be connecting different types of display, some
manual manipulation may be required in order to successfully reproduce audio and
video at all displays.
Continued on next page…
