13
www.tlnetworx.com
TL-DA14-F2 User Manual
8.
Troubleshooting & Maintenance
l
No image on display:
l
Ensure that the display device has been set to the correct input.
l
Ensure that the HDMI cables used for both the source/transmitter and the
receiver/display are properly connected and are working. Test the HDMI cables
directly from a source to display and ensure their operation.
l
Test with 1080p mode. Set the EDID switches to [Pin2, Pin3, Pin4=↓-↑-↓] and
power-cycle the TL-DA14-F2. The only requirement for video to show will be
that the display must support Full HD (1920x1080@60hz)
l
Test with Learning Mode. Set the EDID switches to [Pin2, Pin3, Pin4=↑-↓-↓]
and power-cycle the TL-DA14-F2. This will learn the EDID from Output 1. Be
sure to connect the display with the lowest resolution to Output 1.
If your problem persists after following the above troubleshooting steps, please contact
your authorized reseller or TechLogix technical support.
