Pag.
7 di 16
5. USING THE DISPENSER
a. Connection
When using for the first time connect the dispenser to a power socket and then press the
«I» (pos.3 – chap.2) button on the side where the power cord is connected.
b. Airing
Once the dispenser has been switched on leave it to air for one hour without putting the
Nutella jar in place and without its cover so that the system will be ready for its first use.
Turn the dispenser off and leave it to rest for 30 minutes.
c. First use
For its first use, put a 3 kg drum of Nutella in place and close the dispenser with the top
part, screwing into place the two closures. Start using the lever when the Nutella has
reached the right temperature: you will need to press the lever several times when using it
for the first time in order to prime pumping. This can take several minutes.
In order facilitate the process it is recommended to pump slowly the first product doses
keeping the spout plugged with your finger.
For the first time, when the machine is still new, it is recommended to throw the first 8 to
10 doses of pumped product as an added hygiene precaution.
ATTENTION:
To use the dispenser correctly, the Nutella must be kept and
placed in the dispenser at room temperature (20-24°C). Do not use Nutella at a low
temperature and excessively dense.
ATTENTION:
When opening the dispenser, do not touch the inner heating parts.
ATTENTION:
to prevent possible damage to the pumping unit, the dispenser
must NEVER be transported or lifted by the extraction lever, but by the
jar unit body.
