www.techfass.com
RFID
reader module
MREM 81 MTM(VR)
4 Wiring diagram
4.1 Connection possibilities MREM 81 MTM(VR)
Reader module can be connected as follows:
▪
USECASE A
: Reader module configuration and settings.
If we want to set the reader module and its parameter values, eg what frequency it should read, what HW
address it should have, whether the lock is reverse or standard, etc., it must be connected to the converter, eg
APSUSB or APSLAN and use the desktop application APS Reader, or to CON 110.IP and use the WebHit
application website.
▪
USECASE B:
System-wise, where the individual reader modules are connected to the RS485 bus, where up to
In this case, the reader module is independent on the entry panel, it can operate autonomously or as part of the
APS mini Plus system. The actual configuration of the module and its settings can be performed using the
APSUSB converter and the APS Reader program.
