Page 14
6.7.3 Deleting cards
„above or below“
If a user loses his ID medium, it is usually impossible to delete the ID from the memory with
the procedure described in the previous chapter, since the medium is no longer available
(with an exception of entering the code at the keypad). Following procedure can be used for
deleting such ID. The procedure
requires using an ID medium
, which was inserted
right
before or right after the ID medium
, which should be deleted.
Step 1
Step 2
Step 3
Read the programming card
for
inserting
: the reader goes
into
programming
mode
,
which is indicated by slow
flashing of yellow LED.
Read the programming card
for inserting 5 times in a row;
the reader will go into
Deleting cards “above or
below”
mode indicated by fast
flashing of yellow LED.
Read a card, which is located
in the module’s memory
right
before or right after
the card
you wish to delete. After this
step the module quickly
flashes with yellow LED
Step
4 - A
Step
4 - B
Step 5
For deleting an ID located
right before
the ID used in
precious
step,
read
the
programming
card
for
deleting
.
For deleting an ID located
right after
the ID used in
precious
step,
read
the
programming
card
for
inserting
.
The reader module goes back
into
standard
operating
mode
.
Pic.5 c): Deleti
ng cards “above or below”
