9
Note: The digital values shown at “0” and “100” icons are for reference only.
The actual calibrated values will be different
7.
Touch the Reboot icon to save the settings and reboot the system
8.
Wait until the system completes the rebooting sequence and the home
screen is displayed
The unit is now calibrated and ready to operate
5.1.3
Controlling Mode
The TS555R can be used as stand-alone controller or integrated to any
robot/automation system.
A.
To use as Stand-Alone Controller:
Go to setup screen to check for controlling mode. If the icon “C” is
showing, then it is already set as stand-alone controlling mode. If the
icon “R” is showing, press this icon to change to “C”
B.
To use as integrated controller to robot/automation
Press icon “C” to change to “R”
Note: Users will experience inconsistent dispensing and intermittent
behaviors with their dispensing valves if attempting to run the TS550R
in controller mode when interfacing with the robot.
Stand-alone controlling
mode
Robot mode (integrate
to robotic system)
