10
5.2
DISPENSING
5.2.1
Pressure Adjustment
Note: Pressure in Port A is not regulated. It has the same pressure as the
supplied pressure. Port A is used for valve activation pressure. Make sure
the supplied pressure is set at least 70 psi (4.8 bar). Pressure in Port B is
regulated. It provides constant pressure to feed fluid to the valve.
To adjust pressure in port B:
1.
Touch the “Pressure B” icon to enter the pressure setup screen
2.
Touch the Up and Down arrows to set desired fluid feed pressure
3.
Touch the Check Mark icon to save and exit
5.2.2
To Change Pressure Unit Display
Note: The default pressure unit is PSI. To change pressure unit to BAR,
follow the instructions below.
1.
Touch the Setup icon to enter the setup screen
