TECHCON SYSTEMS TS550R User Manual Download Page 3

 

30

9.

 

MAINTENANCE  

The dispenser is designed and built to be relatively maintenance free.  To assure 
trouble free operation, please follow below steps: 

1.

 

Make certain air supply is clean and dry. 

2.

 

Avoid connecting the unit to excessive moisture or solvent saturation 

3.

 

Avoid connecting air supply exceeding 100 psi (6.9 bars) 

4.

 

Use only Amyl Alcohol to clean outside surface of the main housing 

5.

 

Use only soft cloth to clean the display screen 

 

 

10.

 

LIMITED WARRANTY 

OK International warrants this product to the original purchaser for a period of 2 
years from date of purchase to be free from material and workmanship defects but 
not normal wear-and-tear, abuse and faulty installation.  Defective product or 
subassembly and components under warranty will be repaired or replaced (at OK 
International's option) free of charge. Customer with defective product under 
warranty must contact the nearest OK International office or distributor to secure a 
return authorization prior to shipping the product to the assigned OK International 
authorized service center.  For nearest OK International office or distributor 
contact information, please visit www.techconsystems.com.   OK  International 
reserves the right to make engineering product changes without notice. 

 
 

All returns must be issued with a Returns Authorization number, prior to return. 
Send warranty returns to: 

 

Americas 

OK International  

           10800 Valley View Street 
           Cypress, CA 90630 
 

 

+1 714 230 2398 

 

 

Europe 

OK International 
Eagle Close Chandler’s Ford Ind Est 
Eastleigh, Hampshire 
SO53 4NF 
United Kingdom 
+44 2380 489 100

 

 

 

Asia  

Dover (Shenzhen) Industrial 
Equipment Manufacturing Co., LTD. 
4th Floor East, Electronic Building 
Yanxiang Industrial Zone, High Tech Road 
Guangmin New District 
Shenzhen, P.R.C 
+86 21 64952662   

 

www.techconsystems.com

 

 

 

3

1.

 

SAFETY 

1.1

 

Intended Use: 

WARNING: Use of this equipment in ways other than those described in this User 
Guide may result in injury to persons or damage to property. Use this equipment 
only as described in this User Guide. 

OK International cannot be responsible for injuries or damages resulting from 
unintended applications of its equipment.  Unintended uses may result form taking 
the following actions: 

 

Making changes to equipment that has not been recommended in the User 
Guide 

 

Using incompatible or damaged replacement parts 

 

Using unapproved accessories or auxiliary equipment 

 

1.2

 

Safety Precautions: 

 

Do not operate this unit in excess of maximum ratings/settings 

 

Always wear appropriate personal protective clothing or apparel 

 

The fluid being dispensed may be toxic and/or hazardous.  Refer to Material 
Safety Data Sheet for proper handling and safety precautions 

 

Do not smoke or use open flame when flammable materials are being dispensed 

 

This equipment is for indoor use only 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for TS550R

















Reviews: