Tech
III
.
Main menu
III.a) Valve 1
In this submenu the user may adjust the basic settings of the first valve.
III.a.1) Set temperature
This option is used to set the desired temperature which will be
maintained by the first valve. The temperature may be adjusted in the main screen,
when Temp 1 is active. During proper operation, the temperature of water behind
the valve be approaching the set temperature of the valve.
III.a.2) Activated
This option is used to activate valve 1. When the valve is turned off, the pump
is also inactive. After connecting the controller to the power source, the valve is
always calibrated, even if it is deactivated. It prevents the valve from remaining in
dangerous position.
III.a.3) Calibration of the valve
This function enables the user to calibrate the first valve at any time. During this
process the valve is restored to its safe position – in the case of CH valve it is fully
-
5
-