Tech
➢
weather-based control
➢
change in valve set temp.
➢
room temperature difference
➢
room temperature reduction
➢
proportionality coefficient
➢
maximum floor temperature
➢
pump activation
➢
factory settings
➢
valve removal – this option is used to remove the valve from the controller
memory. Valve removal is used e.g. at disassembling the valve or module
replacement (re-registration of a new module is necessary)
nformation on how to set those parameters which have not been described in detail
above, may be found in section Valve 1,2 and 3.
IV.f)Internet module
Note: This type of control is available only after purchasing and connecting an
additional controlling module ST-500 which is not included in the standard
controller set.
Internet module is a device enabling the user remote control of the CH boiler
via the Internet or local network . The user controls the status of all Ch boiler
system devices on the home computer screen and the operation of each device is
presented in the form of animation.
Apart from the possibility to view the temperature of every sensor, the user
can change the set temperatures for both the pumps and the mixing valves.
After switching the module on and selecting DHCP option, the controller
automatically downloads such parameters as IP address, IP mask, gateway address
and DNS address from the local network. If any problems arise when downloading
the network parameters, they may be set manually. The procedure of obtaining
these parameters is described in detail in the instruction manual of the Internet
Module.
Module password reset function may be used when the user has changed the
default password on the login page. If the user's new password is lost, the default
password may be restored by resetting the module password.
IV.g) GSM module
Note: This type of control is available only after purchasing and connecting an
additional controlling module ST-65 which is not included in the standard controller
set.
-
23
-