6
WARNING
The controller may be installed on a DIN strip.
IV.
FIRST START-UP
Follow these step while starting the device for the first time to ensure its failure-free operation:
Step 1. Connect L-8 controller with all the devices to be controlled
In order to connect the cables, remove the controller cover and connect the cables as indicated on connector labels and
diagrams below:
-
All the necessary valve actuators ST-230/2 (connectors 1-8)
-
Internet module (using RS cable)
-
Pump
-
An additional device
Pictorial diagram presenting wiring and communication with other devices in the system:
