manualshive.com logo in svg

Tech Source GXTRA Series, Hardware Installation, Page: 3 / 58

Share
Download
Tech Source GXTRA Series Hardware Installation Download Page 3

Addendum Information

Date Released 

October 30, 1992

Changes made to:

REVISION

NUMBER

CHANGES

DATE

A

B

C

D

E

Changes made to reflect 

GXTRA

PROM revision 2.2

Added resolutions 

GXTRA/1

 , 

timing 

GXTRA/2 DB

, 

GXTRA/3

Stereo

 and 

GXTRA/4 CFP

Update timing parameters and
figures, add 

GXTRA/3 Color Stereo

GXTRA/1 Turbo

 replaces 

GXTRA/1

GXTRA/2 Turbo 

replaces

 GXTRA/2

GXTRA/3 Turbo

 replaces 

GXTRA/3

10/30/92

07/21/93

05/16/94

09/07/94

09/11/97

The Tech-Source Inc. logo 

 , Tech-Source, 

GXTRA

,

GXTRA/2

 

Turbo

, 

GXTRA/3

 

Turbo

 are trademarks of Tech-Source

Inc.

All SPARC trademarks, are trademarks or registered trademarks of
SPARC International, Inc.  Products bearing SPARC trademarks
are based upon an architecture developed by Sun Microsystems,
Inc.  SunView, X11/NeWS, OpenWindows, Sun, Sun-4, and Solaris
are trademarks and registered to Sun Microsystems, Inc.

All other products or services mentioned in this document are
identified by the trademarks or service marks of their respective
companies or organizations, and Tech-Source Inc. disclaims any
responsibility for specifying which marks are owned by which
companies or organizations.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for GXTRA Series



























































Reviews:

No comments