background image

vii

Important Safeguards and Warnings 

1

Electrical safety 

All installation and operation here should conform to your local electrical safety codes.   
We assume no liability or responsibility for all the fires or electrical shock caused by improper 
handling or installation.   

2

Transportation security 

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and 
installation. 

3

Installation 

Keep upwards. Handle with care.   
Do not apply power to the NVR before completing installation. 
Do not place objects on the NVR 

4

Qualified engineers needed 

All the examination and repair work should be done by the qualified service engineers.     
We are not liable for any problems caused by unauthorized modifications or attempted repair. 

5

Environment 

The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, explosive 
substances and etc. 
This series product shall be transported, storage and used in the specified environments. 

6. Accessories

Be sure to use all the accessories recommended by manufacturer. 
Before installation, please open the package and check all the components are included. 
Contact your local retailer ASAP if something is broken in your package. 

7. Lithium battery

Improper battery use may result in fire, explosion, or personal injury!   
When replace the battery, please make sure you are using the same model! 

Before your operation please read the following instructions carefully. 

z

 

Installation environment 

—

  Keep away from extreme hot places and sources

   

—

  Avoid direct sunlight

 

—

  Keep away from extreme humid places

 

—

  Avoid violent vibration

 

—

  Do not put other devices on the top of the NVR

 

—

  Be installed in well ventilated place; do not block the vent. 

z

 

Accessories 

Summary of Contents for NVR-ELC-32-DH Series































































































































































Reviews: