－
1
－
Recommended Flying Setup
Max servo travel of aileron: 30 degrees up and 30degrees
down(38mm)
Max servo travel of elevator:60 degrees up and 60 degrees
down
（
70mm
）
Max servo travel of rudder: 65 degrees left and 65 degrees
right
（
96mm
）
CG Position:
80-95mm from the leading edge of the wing,.
Parts included in the packing
1 Fu Rudder(vertical tail) 1pcs
2 Wing with aileron (right and left) 2pcs
3 Elevator (stabilizer) 1pcs
4 Landing gear 1pcs
5 Wheel 2 pcs
6 Extension arm 2pcs
7 Pushrod connector 4pcs
8 Screw 3*10 4 pcs
9 Screw 2*3 2 pcs
10 Wheel pants 2pcs
11 Plywood control horn 4pcs
12 Bracing 1pcs
13 Z -Bend 1.2 mm *220mm 4pcs
14 Carbon rod 1.3mm*190mm 2pcs
15 Baldachin 4pcs
The items below are required for assembly
1.Set the servo mount on the servo.
2.Glue the rudder servo mount on to the around of pre-cut hole.
3.Fix the servo onto the servo arm by using 2pcs screw
Pls pay more attention the servo wires when you fix the servo .
1
2
3
4
5
7
8
9
10
11
13
14
6
15
12
C
G
8
0
－
9
5
m
m
