Tech Line TL-37LC735, Operating Instruction

Page: 41 / 52

- 39 -
Install menu
By pressing
_
/
`
button, select the fourth icon.
Install menu appears on the screen.
Program
By pressing
a
/
b
button, select Program.
Press _ / ` button to select the program num-
ber. You can also enter a number via digit but-
tons on the remote control. There are 100 pro-
gram storage between 0 and 99.
Band
Band
can be selected either “C” or “S” by press-
ing _ / ` button.
Channel
Channel
can be changed by _ / ` button or
Digit Buttons.
Colour System
By pressing
a
/
b
button, select Colour Sys-
tem. Press
_
/
`
button to change the colour
system to PAL, SECAM, PAL60 or AUTO .
If Sound System is set to I, SECAM is not
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
a
/
b
button, select Sound Sys-
tem. Press
_
/
`
button to change the
sound system to BG, DK, I, L or LP .
Fine Tune
By pressing
a
/
b
button, select Fine Tune.
Press _ / ` button to adjust the tuning.
Search
By pressing
a
/
b
button, select Search.
Press
_
/
`
button to start program searching.
The searching will stop when a signal is found.
You can also enter a frequency value directly
by pressing the digit buttons.
VCR (Video Cassette Recorder)
• This item can be seen in all modes except
EXT-3 and EXT-5.
• If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode “on”. For this, while the cursor is
on this item press the
_
/
`
buttons to set it
“ On ”.
• If you want to watch a DVD , then you must
set this item “ Off ”.
Store Program
By pressing
a
/
b
button, select Store Pro-
gram. Press
_
/
`
or “ OK ” button to store the
adjustments. “Program Stored” will be dis-
played on the screen.
Program menu
By pressing _ / ` button, select the fifth icon.
Program menu appears on the screen.
,79
=')
&+
&
&
&
&
&
&
& &
&
&
6
1DPH ,QVHUW
'HOHWH $36
352*5$0
02-ENG-37735-1072 UK-37 INCH 17MB15 OEM-(WO VGA)(PIP)(S)-50097076.p65 20.11.2006, 19:41 39