background image

4

SAVE THESE INSTRUCTIONS!

7400 Linder Ave, Skokie,

60077

IL

847.410.4400

www.techlighting.com

© 2017 Tech Lighting, L.L.C. All rights reserved. The "Tech Lighting" graphic is
a registered trademark of Tech Lighting, L.L.C. Tech Lighting reserves the right
to change specifications for product improvements without notification.

A Generation Brands Company

Summary of Contents for Vex Outdoor Wall

Page 1: ...eration of the product and the hazards involved Use minimum 90 c supply conductors G P I ENERAL RODUCT NFORMATION These fixtures are intended to be installed utilizing compliant junction boxes NEC This product may be dimmed with a low voltage electronic dimmer or a 0 10V dimmer depending on the wiring configuration Suitable for wet locations 1B 3 2 Unscrew and remove the knurled nuts Remove the mo...

Page 2: ...wo mounting studs horizontally and mount the mounting plate to the electrical box with the two 8 32 screws provided 4 THREADED STUD 8 32 SCREW 8 32 SCREW THREADED STUD 1D 5 5 Neatly tuck all wires and wire nut connections into the electrical box mount the fixture onto the threaded studs and secure it in place by screwing the knurled nuts onto the studs 1E 8 KNURLED NUT THREADED STUD 2 1F 9 For wet...

Page 3: ...ER HOUSING SET SCREW ALLEN WRENCH 11 11 NOTE Make sure the sealant is dry before reinstalling the cover LIP The angle markers can be adjusted independently Open and close the angle markers on the top and bottom of the fixture to the desired beam angle Tighten the set screws on the sides of the angle markers with the provided Allen wrench to lock them in place Adjust the Fixture 2A 1 ANGLE MARKERS ...

Page 4: ...www techlighting com 2017 Tech Lighting L L C All rights reserved The Tech Lighting graphic is a registered trademark of Tech Lighting L L C Tech Lighting reserves the right to change specifications for product improvements without notification A Generation Brands Company ...

Reviews: