Charging:
1. Connect the USB cable provided to the USB charging input on the back of the work light.
2. Connect the USB plug to a USB mains power adaptor (not included) or a USB charging port
on a computer.
3. Charging will take between S and 10 hours depending on if you're using a SVDC, 1 A power
supply or a computer USB port which is only S00mA.
4. The battery level indicator will have all 4 LEDS displayed when fully charged, you can now
disconnect the USB charging cable.
Modes:
Press the power/mode button to use each of the modes on the work light.
1. Battery Level Indicator
2. High
3. Medium
Safety:
4.Low
S. Flashing
6. Off
1. Place the LED work light in a wel I ventilated area and keep a distance of at least
0.Sm if placed near a wall.
2. Do not open the equipment or touch any of its internal parts.
3. Do not expose the charging input socket or cable to water or any other liquids.
Specifications:
LED: l0WCOB
LED Colour: Cool White
Lumens: 1000
Burn Time: 3hrs (High)
6hrs (Medium)
9hrs (Low)
3hrs (Flashing)
Charging Time: Shrs@ 1 A
Charging Input: SVDC, lA
Battery: Li-Ion 3. 7V, 4400mAh
USB Charging Port: SVDC, 1A
IP Rating: IP54
Protection: Charge & Discharge
Dimensions: 172(W) x 127(H) x 46(D)mm
Distributed by:
Reduction Revolution Pty Ltd
www.reductionrevolution.com.au
Summary of Contents for SL-2858
Page 1: ......
