We are committed to protecting the
environment. Manufacturing electronic
devices imposes an obligation of providing
for environmentally safe disposal of used
electronic components and devices. Hence,
we have been entered into a register kept by
the Inspection For Environmental Protection.
The crossed-out bin symbol on a product
means that the product may not be disposed
of to household waste containers. Recycling
of wastes helps to protect the environment.
The user is obliged to transfer their used equipment to a collection
point where all electric and electronic components.
EN
USER’S MANUAL
EU-R-12s
WARRANTY CARD
TECH company ensures to the Buyer proper operation of the device for the period of 24 months from the date of sale. The
Guarantor undertakes to repair the device free of charge if the defects occurred through the manufacturer’s fault. The device should be
delivered to its manufacturer. Principles of conduct in the case of a complaint are determined by the Act on specifi c terms and conditions
of consumer sale and amendments of the Civil Code (Journal of Laws of 5 September 2002).
CAUTION! THE TEMPERATURE SENSOR CANNOT BE IMMERSED IN ANY LIQUID (OIL ETC). THIS MAY RESULT IN DAMAGING THE
CONTROLLER AND LOSS OF WARRANTY! THE ACCEPTABLE RELATIVE HUMIDITY OF THE CONTROLLER’S ENVIRONMENT IS 5÷85%
REL.H. WITHOUT THE STEAM CONDENSATION EFFECT.
THE DEVICE IS NOT INTENDED TO BE OPERATED BY CHILDREN.
Activities related to setting and regulation of the controller parameters described in the Instruction Manual and parts wearing out during
normal operation, such as fuses, are not covered by warranty repairs. The warranty does not cover damages arising as a result of
improper operation or through the user’s fault, mechanical damage or damage created as a result of fi re, fl ood, atmospheric discharges,
overvoltage or short-circuit. The interference of an unauthorized service, wilful repairs, modifi cations and construction changes cause
the loss of Warranty. TECH controllers have protective seals. Removing a seal results in the loss of Warranty.
The costs of unjustifi able service call to a defect will be borne exclusively by the buyer. The unjustifi able service call is defi ned as a
call to remove damages not resulting from the Guarantor’s fault as well as a call considered unjustifi able by the service after diagnosing
the device (e.g. damage of the equipment through the fault of the client or not subject to Warranty), or if the device defect occurred for
reasons lying beyond the device.
In order to execute the rights arising from this Warranty, the user is obliged, at his own cost and risk, deliver the device to the Guarantor
along with a correctly fi lled-in warranty card (containing in particular the sale date, the seller’s signature and a description of the defect)
and sales proof (receipt, VAT invoice, etc.). The Warranty Card is the only basis for repair free of charge. The complaint repair time is
14 days.
When the Warranty Card is lost or damaged, the manufacturer does not issue a duplicate.
...................................... ......................................
seller’s stamp date of sale
SAFETY
Before using the device for the fi rst time the user should read the
following regulations carefully. Not obeying the rules included in
this manual may lead to personal injuries or controller damage.
The user’s manual should be stored in a safe place for further
reference. In order to avoid accidents and errors it should be
ensured that every person using the device has familiarized
themselves with the principle of operation as well as security
functions of the controller. If the device is to be sold or put in a
diff erent place, make sure that the user’s manual is there with
the device so that any potential user has access to essential
information about the device.
The manufacturer does not accept responsibility for any injuries or
damage resulting from negligence; therefore, users are obliged to
take the necessary safety measures listed in this manual to protect
their lives and property.
WARNING
•
The regulator is not intended to be used by children.
•
Any use other than specified by the manufacturer is
forbidden.
•
The device should be installed by a qualified person.
•
Make sure the device is disconnected from the mains before
performing any activities involving the power supply (plug-
ging cables, installing the device etc.).
UE DECLARATION OF CONFORMITY
Hereby, we declare under our sole responsibility that
EU-R-12s
manufactured by TECH STEROWNIKI, head-quartered in Wieprz
Biała Droga 31, 34-122 Wieprz, is compliant with Directive
2014/35/EU of the European Parliament and of the Council of
26 February 2014 on the harmonisation of the laws of Member
States relating to the making available on the market of electrical
equipment designed for use within certain voltage limits (EU
OJ L 96, of 29.03.2014, p. 357), Directive 2014/30/EU of the
European Parliament and of the Council of 26 February 2014
on the harmonisation of the laws of Member States relating to
electromagnetic compatibility (EU OJ L 96 of 29.03.2014, p.79),
Directive 2009/125/EC establishing a framework for the setting
of ecodesign requirements for energy-related products as well
as the regulation by the MINISTRY OF ENTREPRENEURSHIP
AND TECHNOLOGY of 24 June 2019 amending the regulation
concerning the essential requirements as regards the restriction of
the use of certain hazardous substances in electrical and electronic
equipment, implementing provisions of Directive (EU) 2017/2102
of the European Parliament and of the Council of 15 November
2017 amending Directive 2011/65/EU on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment (OJ L 305, 21.11.2017, p. 8).
For compliance assessment, harmonized standards were used:
PN-EN IEC 60730-2-9:2019-06, PN-EN 60730-1:2016-10
.
Wieprz, 20.10.2022
TECHNICAL DATA
Power supply
5V DC
Max. power consumption
0,1W
The pictures and diagrams are for illustration purposes only.
The manufacturer reserves the right to introduce some hanges.
DESCRIPTION
The EU-R-12s room regulator is designed to cooperate with
controllers EU-L-12, EU-ML-12 and EU-L-X WiFi.
It should be installed in heating zone. The regulator sends current
room temperature and humidity readings to the external controller,
which uses the data to control thermostatic valves (opening them
when the temperature is too low and closing them when the room
temperature has been reached).
Current temperature is displayed on the screen. The EXIT button
enables the user to change the displayed parameter from current
temperature to current humidity or floor temperature.
The regulator enables the user to change the pre-set zone
temperature permanently or for a period of time.
Controller equipment:
•
built-in temperature sensor
•
air humidity sensor
•
floor sensor (optional)
•
front panel made of glass
