Tech Controllers EU-M-8N, User Manual

Page: 10 / 20

10
2. ZONES
This menu is described in detail in section VI.
3. EXTERNAL SENSOR
3.1. CALIBRATION
Room sensor calibration should be performed while mounting or after the regulator has been used for a long time, if the
external temperature displayed differs from the actual temperature. Calibration setting range is from -10°C to +10°C with the
accuracy of 0,1°C.
3.2. INFORMATION
After selecting this function, the controller display will show signal strength and external sensor battery level.
4. TEMPERATURE SENSOR
This function is used to register the temperature sensor (C-8r, C-mini or CL-mini). Follow these steps in order to register the
sensor:

Select registration option in EU-M-8n (Menu > Temperature sensor > Registration)

Press the registration button on the sensor.
5. REGISTRATION
This function enables the user to register EU-M-8n room regulator in the EU-L-8e main controller. In order to register:

Select Registration in EU-M-8n (Menu > Registration)

Select Registration in EU-L-8e controller menu (Menu > Zones 1-8 > Registration)
6. TIME SETTINGS
This function enables the user to set current date and time which will be displayed in the main screen.
7. SCREEN SETTINGS
This function enables the user to adjust the screen parameters to individual needs.
7.1. SCREENSAVER

Screensaver selection - After tapping on this icon, the user may deactivate the screensaver (No screensaver) or set
the screensaver in the form of:

Slide show – the screen displays the photos at a user-defined frequency. This option may be activated if
the photos have been uploaded first.

Clock - the screen displays the clock

Blank – after a pre-defined time of inactivity the screen goes blank
Uploading photos – Before importing the photos to the controller memory they must be processed using ImageClip (the
software may be downloaded from http://tech-controllers.com/download/software). After the software has been
installed and launched, load the photos. Select the area of the photo which will be displayed on the screen. The photo
may be rotated. After one photo has been edited, load the next one. When all the photos are ready, save them in the
main folder of the flash drive. Next, insert the flash drive into the USB port and activate Picture import function in the