Description
The EU-C-8f sensor is intended to be installed in heating zones. It sends
current floor temperature readings to the main controller.
Colour versions: white and black.
How to install
Before installing the sensor, plug the floor temperature sensor NTC to the
EU-C-8f sensor. Polarity does not matter!
How to register a EU-C-8f sensor in a
given zone
Each sensor should be registered in the main controller in a particular
zone - Zones/Floor heating/Registration. After selecting Registration,
press the communication button on the selected temperature sensor
EU-C-8f.
If the registration attempt has been successful, the screen will display
a message to confirm and the control light on the EU-C-8f sensor will
flash twice.
Bear in mind the following rules:
- the maximum of one temperature sensor may be registered in each
zone;
- if the user attempts to register a sensor in the zone in which another
sensor has already been registered, the first sensor becomes unregistered
and it is replaced by the second one.
For each temperature sensor assigned to a zone the user may set the
maximum temperature above which the main controller will disable the
floor heating to protect the floor.
NOTE
Only one room sensor should be assigned to each zone.
The pictures and diagrams are for illustration purposes only.
The manufacturer reserves the right to introduce some hanges.
Safety
Before using the device for the first time the user should read the
following regulations carefully. Not obeying the rules included in this
manual may lead to personal injuries or controller damage. The user’s
manual should be stored in a safe place for further reference. In order to
avoid accidents and errors it should be ensured that every person using
the device has familiarized themselves with the principle of operation as
well as security functions of the controller. If the device is to be sold or
put in a diff erent place, make sure that the user’s manual is there with
the device so that any potential user has access to essential information
about the device.
The manufacturer does not accept responsibility for any injuries or
damage resulting from negligence; therefore, users are obliged to take
the necessary safety measures listed in this manual to protect their lives
and property.
WARNING
•
The device should be installed by a qualified electrician.
•
The sensor should not be operated by children.
•
Before and during the heating season, the controller should be
checked for condition of its cables. The user should also check if
the controller is properly mounted and clean it if dusty or dirty.
Technical data
Sensor type..............................................................................NTC
Temperature measurement range ........................................-30÷500
C
Communication frequency....................................................868 MHz
Power supply ....................................................2xbatteries 1,5V AAA
Measurement accuracy.........................................................+/-0,50
C
We are committed to protecting the environment.
Manufacturing electronic devices imposes an
obligation of providing for environmentally safe
disposal of used electronic components and
devices. Hence, we have been entered into a
register kept by the Inspection For Environmental
Protection. The crossed-out bin symbol on a
product means that the product may not be
disposed of to household waste containers.
Recycling of wastes helps to protect the
environment. The user is obliged to transfer
their used equipment to a collection point where
all electric and electronic components will be
recycled
.
Floor
sensor
AAA
AAA
Communication
button
