5
IV.
USER MENU
1.
HOME PAGE
During standard operation of the controller,
graphic
display shows the main page. Apart from the selected scheme, the
display also shows:
- operation mode (or type of alarm),
- current time,
- collector temperature,
- current temperature of the heat tank,
- temperature of all additional sensors depending on selected configuration.
On the right-hand side of the screen you may see the following icons:
Active operation mode icon
Icon of active additional device (peripherals)
Automatic operation mode
Circulating pump
Collector defrosting mode
Pellet CH boiler fire-up (voltage-free
signal)
Holiday mode
Heater
Collector overheating (alarm mode)
Anti - legionella
Sensor damage (alarm mode)
1/17
Selected scheme
If one of the sensors is damaged, an additional icon will be flashing
in the place of the damaged sensor temperature.
The icon indicates which sensor was disconnected or damaged.
Additionally, the pump icon will be displayed on the system scheme (if the pump is working/rotating) or/and the valve
icon will appear (with an indication of current circulation direction).
