TRADEMARK 30 SPECIFICATIONS
Note: With on-going product development and improvements, specifications and/or
the cosmetic appearance of this unit may change without prior notice.
Model Number:
TM30
Input Impedance:
1MOhm
Nominal Input Level:
-10dBu*
Optimal Output Load:
4 Ohm minimum
Power Output:
30W
Effect Loop Input Impedance:
1MOhm
Maximum Effect Loop Input Level: approx. -6dBu*
Effect Loop Output Impedance:
1KOhm
Effect Loop Output Level:
approx. -20dBu*
XLR Output Level:
approx. -20dBu*
Maximum Power Consumption:
60W
AC Input Power:
100V, 117V, 230V, 240V
Cycles:
50/60 Hz
NOTE: Each unit is constructed for specific voltages. See authorized
dealer/distributor for voltage modification information.
Speaker:
Model #2110-T, Tech 21 Special Design 10”
50 Watts - 4 Ohms
Dimensions:
14.5”l x 8”w x 13.25”h
Weight:
14 lbs.
*
Measured using a -10dB 400Hz test signal with all amp controls flat, no reverb.
Actual levels will vary with your settings.
Optional Accessories and Speaker Cabinets:
•Gig Bag:
To carry your Trademark 30 or for general use.
Black with silver logo, shoulder strap and handles, plus roomy front
compartment. 15”l x 10.5”w x 13.5”h.
•Power Engine 60s:
60-watt, multi-purpose powered extension cabinets
available in three formats: 1x12 and 2x12 loaded with 12” Celestion
®
Seventy80 speakers, and 4x10 loaded with custom-designed Eminence
®
speakers. Covered in black vinyl with wheat grill and white piping.
Replacement parts are available,
i.e., knobs, grill panel, speaker, logo plate,
handle, vinyl cover, etc. For more information, please contact Tech 21.
®Registered trademarks. Names of sample settings are intended for descriptive purposes
only and should not be construed as an endorsement or affiliation
with the companies or artists named.
CUSTOM SETTINGS
