6. Instrument Features
136
IFU for Infinite 200 PRO No. 30052730 Rev. No. 1.6
2016-04
6.2
Instrument Specifications
The table below lists the technical specifications of the instrument:
Parameters
Characteristics
General
Measurement
Software controlled
Interface
USB
Filter Handling:
Infinite F200 PRO
External filter exchange
Infinite M200 PRO
Monochromator-based wavelength selection
– no filters necessary
Microplates to be
measured
From 6-well to 384-well plates
(SBS standard formats)
Plate Definition
Via scanning software
Temperature Control
From 5 °C above ambient up to 42 °C
Plate Shaking
Linear and orbital shaking, amplitude selectable from 1
– 6 mm in 0.5 mm steps
Light Source
High energy xenon flash lamp,
life time: 10
8
flashes
Optics
Fused Silica Lenses
Detectors:
Fluorescence
Standard: PMT
Spectrally enhanced: red-sensitive PMT
Luminescence
Low dark count photomultiplier tube
photon-counting electronics (Standard PMT)
Absorbance
Silicon photodiode
AlphaScreen
Low dark noise photomultiplier tube (PMT)
Power Supply
Auto-sensing: 100 – 120 V/220 – 240 V, 50-60 Hz
Power Consumption
150VA
Physical
Outer Dimensions:
Basic instrument
Width: 425 mm
Height: 253 mm
Depth: 457 mm
16.73 inches
9.96 inches
17.99 inches
Pump Module
Width: 250 mm
Height: 155 mm
Depth: 156 mm
9.84 inches
6.10 inches
6.14 inches
Weight:
Infinite F200 PRO
14.0 kg
Infinite M200 PRO
15.8 kg
Pump Module
3.4 kg
