Item #4259, shoulder screw
Item #S1097, strap assembly
Insulating Foam
9) Turn the unit right side up.
10) Remove (4) 6-32 truss head screws from sides of the apron
(2 per side).
11) Install (4) 6-32 shoulder screws, item #4259, in place of the (4)
truss head screws removed in the previous step.
12) Place the beaker/bottle inside the cold shoe and place the
insulating foam in front of the beaker.
13) Use (2) strap assemblies, Item #S1097, and the foam to hold
the beaker firmly in place against the cold shoe.
INTERPRET GEOMETRIC
COLD SHOE INSTALLATION
SIZE
CHECKED
AA
FINISH
DWG. NO.
TECA CORPORATION.
WITHOUT THE WRITTEN PERMISSION OF
TOLERANCING PER:
PROPRIETARY AND CONFIDENTIAL
DRAWING IS THE SOLE PROPERTY OF
TECA CORPORATION IS PROHIBITED.
SK170710
S1098
DO NOT SCALE DRAWING
DRAWN
10/10/17
DATE
THE INFORMATION CONTAINED IN THIS
A
THREE PLACE DECIMAL
SHEET 3 OF 3
MATERIAL
ANY REPRODUCTION IN PART OR AS A WHOLE
NAME
REV
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH BEND
TWO PLACE DECIMAL
AHP-1200MSP
UNLESS OTHERWISE SPECIFIED:
