THREE PLACE DECIMAL
BEND
TECA CORPORATION IS PROHIBITED.
DRAWN
S1098
SK170710
10/10/17
UNLESS OTHERWISE SPECIFIED:
CHECKED
SIZE
AHP-1200MSP
TOLERANCING PER:
AA
TWO PLACE DECIMAL
INTERPRET GEOMETRIC
COLD SHOE INSTALLATION
PROPRIETARY AND CONFIDENTIAL
NAME
DO NOT SCALE DRAWING
MATERIAL
REV
A
FINISH
DWG. NO.
DATE
DIMENSIONS ARE IN INCHES
TOLERANCES:
FRACTIONAL
ANGULAR: MACH
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
TECA CORPORATION.
ANY REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
SHEET 1 OF 3
1) Carefully set the unit on it's back using the included insulating foam under the unit
to protect the power input module/switch.
2) Peel and remove the clear plastic film from the cold plate surface.
3) Carefully place the cold shoe assembly on the cold plate aligning the
(4) exterior holes on the cold shoe with the threaded inserts on the cold
plate. Make sure there is no foreign material between the cold plate
and the cold shoe.
4) Secure the cold shoe on the cold plate with (4) 6-32 x 5/8 socket head
cap screws, item #3142 & (2) 6-32 x 2 3/4 socket head cap screws, item
#4277. Tighten the screws using the provided Hex L-Key, item #4280.
Cold Shoe Assembly
socket head cap screw
Item #3142, 6-32 x 5/8
Item #4277, 6-32 x 2 3/4
socket head cap screw
