manualshive.com logo in svg

TEC TEC MA-1350-1 SERIES, Programming Manual

Share
Download
TEC TEC MA-1350-1 SERIES Programming Manual Download Page 79

- 77 -

EO3-11084

MA-1350-1 SERIES

Time length (seconds) set for drawer warning

TEC STORE

   1343 PEACH DRIVE
    PHONE: 87-6437

Open  8:00am to 7:00pm
Closed: every Wednesday

 11-28-1997     #0

   

    P39

                      20

            0093 12:21TM

Max. 2 digits;

1 to 99 (seconds)

Declaration of Program No. 39 for
Drawer Warning Time Setting

Drawer Warning Time Setting

NOTES:

1. The value of 0 second cannot be programmed. (To clear Warning Mode, reset the Warn-

ing option itself.)

2. After an All Memory Clear operation, the value of 15 seconds is set automatically as

standard value.

3. This setting will be effective only when the following options are selected in System

Option Setting:

Address 21 - Bit 2:

Drawer Warning Alarm “ACTIVE” (SET status)

Address 19 - Bit 3:

Drawer-close  “COMPULSORY” (SET status)

9

@/FOR

3

AT/TL

Summary of Contents for TEC MA-1350-1 SERIES


































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands