- 21 -
EO3-11084
MA-1350-1 SERIES
Blank Keyboard Sketch (for your planning aid)
(Refer to the “List of
Keys” on the preceding
page.)
For the Standard Key-
board Layout, refer to
Chapter “8. Keyboard”
of the Operator’s Guide in
the Owner’s Manual.
Fill in:
Key Name
Key Code
▼
▼
Max. 66 Keys
( ) ( )
( ) ( )
( )
( )
( )
( )
( )
( )
( )
0
7
8
9
5
6
4
2
3
1
( )
( )
( )
( )
( )
( )
( ) ( ) ( )
( )
( ) ( ) ( )
( )
( ) ( ) ( )
( )
( ) ( ) ( )
( )
( ) ( ) ( )
( )
( ) ( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
Normal Keyboard
Max. 106 Keys
( )
( ) ( ) ( )
( )
( ) ( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
Flat Keyboard
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
0
7
8
9
5
6
4
2
3
1
( ) ( )
( )
( ) ( ) ( ) ( )
( )
( ) ( )
NOTES
1. If Key Installation Setting is operated for the first time, all the keys are already set as in the
Standard Keyboard Layout. Therefore, set only the keys that are to be changed as to their
locations or newly installed.
2. If a wrong code has been entered and the key has also been depressed (i.e.,a wrong code has
been set on a key), enter the correct code and depress the key. The code entered last will be
effective.
3. If “0” is entered as Key Code, the key will be dead and its memory will also be closed.
4. Each of the keys programmed in this operation will have its memory (if any) opened automatically.
5. The [C] key, if once set with Key Code 95, may be used to clear an error , but it cannot be used
immediately after a Key Code entry (for the purpose of clearing the wrong Key Code error). If any
Key Code is entered and then the [C] key is depressed, that Key Code will be set on the key that
was once the [C] key.
6. On depressing the final [AT/TL] key, “0.00” is displayed in the AMOUNT portion , indicating that
the setting operation is completed. No printing occurs.
7. Use the Blank Keyboard Layout on this page, if necessary, for your own keyboard plan before
starting the setting procedure.
