TEC TEC EM1-31076 Owner'S Manual Download

Page: 36 / 92

10. PROGRAMMING PROCEDURES

10.7 COMBINATION MESSAGE

10-15

NOTE:

The scrolling up/down methods allow displaying 16 characters per line, up to a total of 90
characters per display.

3. Display method varies depending on message construction.

1) message combination

a. single message

･･･････

either scrolling or fixed is available.

b. multiple message

･･････

scrolled regardless of selection.

2) logo combination

Logo must be a single logo and a fixed display. When logos are combined, no
message will be displayed.

3) combination of message and logo

It is prohibited. When both a message and logo are combined together, only
message will be displayed.

4. You can press the

and the

keys to exit the procedure at any time.

However, no data will be stored without pressing the

key.

PROG

ESC.

ENTER

5. Display method

1) Fixed

2) Scrolling

3) Flashing

4) Curtaining

5) Scrolling up

6) Scrolling

down

ANK YOU CALL AGA

THANK YOU CALL

THANK YOU !

(blank)

THANK YOU !

(blank)

ANK Y

THANK YOU !

Summary of Contents for TEC EM1-31076





























































































Search results

Summary of Contents for TEC EM1-31076

Reviews:

Related manuals for TEC EM1-31076

Brands by name

Popular brands

TEC TEC EM1-31076, Owner'S Manual

Search results

Summary of Contents for TEC EM1-31076

Reviews:

Related manuals for TEC EM1-31076

Brands by name

Popular brands