TEC TEC B-670 SERIES, Owner'S Manual

Page: 27 / 34

E11-5
ENGLISH VERSION EO1-33016 11. GENERAL MAINTENANCE
■
Cleaning the Cutter Unit
1. Loosen two screws and remove the cutter cover.
2. Remove the white screw and media guide.
3. Remove the jammed paper and trash.
4. Clean the cutter with dry cloth.
11.4 REMOVING JAMMED MEDIA
5. Assembling is reverse order of removal.
■
Cleaning the strip unit
1. Lower the backing paper release bar to remove the jammed media.
2. Clean the strip roller and backing paper holder with ethyl alcohol.
White Screw
Cutter Unit
Swing Cutter
Media Guide
Screw
Fixed Cutter
Cutter Cover
Fig. 11-7
Backing Paper Release Bar
Backing Paper Holder
Strip Roller
Fig. 11-8
WARNING!
1. Be sure to turn the power off before cleaning the cutter unit.
2. The cutters are sharp and care should be taken not to injure yourself when cleaning.
WARNING!
Be sure to turn the power off before cleaning the strip unit.