background image

- 85 -

EO1-11116

MA-516-100 SERIES

To cash other non-cash media:

NOTES

1. The Tax Exempt entry cannot be item-corrected.

2. After depressing the [EX] key, the sale must only be finalized (for payment through media

keys).

3. If the “Non-taxable Amount Limit” is set for certain areas in Canada, using the [GST/M] key

will cause an error and GST Exemption is not allowed. The “Non-taxable Amount Limit”
judgment function is still active even after tax exemption of PST1 or PST2.

Check Cashing

(Check Tender)

(Other Non-cash Media Keys)

Check cashing (cashing non-cash media) requested by a customer is entered through a non-cash media key. It is
operable only outside a sale (i.e. when no sale is underway on the register).

Operable outside a sale only

To cash a check:

CHK
TND

OFF

Z

REG

X

SET

MGR

-

Check amount to be cashed;
max. 7 digits

Chg

CPN

MISC

NOTE 2

1

0

0

0

(

or

)

1

0 00

CHK
TND

NOTE 3

Chg

NOTE 3

CPN

NOTE 3

MISC

→

Non-cash media amount to be cashed;

max. 7 digits

Example)

To enter $10.00:

NOTES

1. When the media key is depressed, the drawer opens to enable exchanging the check (or

other non-cash media) into cash.

2. The [CHK TND] key is programmed to allow cashing as initial status. It can be programmed

to prohibit it. (Refer to Chapter “22. System Option Setting , Address 7 - Bit 3 on page 125.)

3. The non-cash media keys other than [CHK TND] are programmed to prohibit cashing as

initial status. Each of them can be programmed to allow it. (Refer to Chapter “22. System
Option Setting”, Bit 3 of Address 8, 9, or 10
 on pages 126, 127 and 128.)

4. The cashing operation will not increment the No-sale Counter of the report memory.

Summary of Contents for MA-516-100 Series







































































































































































Reviews: