TEC MA-1535 series, Owner'S Manual

Page: 110 / 130

4. PROGRAMMING OPERATIONS
EO1-11148
4.7 PLU Table Programming (Submode 4)
4-15
NOTES: 1. In each item setting, depressing the [AT/TL] key without data entry skips to the next
item setting.
2. Up to 24,000 PLUs are programmable. (The Number of PLU varies depending on the
capacity and allocation of the RAM.)
3. Entering 2 digits of numeric code provides an alphanumeric character of PLU Name.
Therefore, odd number of numeric digit entry will cause an error. When less than 36
digits of numeric data are entered, this ECR uses space code entry. If a PLU Name
includes spaces at the beginning, entering space code is required at the beginning of
data entry. For the PLU name, up to 18 regular-sized or 9 double-sized characters can
be entered. Also a combination of both types can be entered.
4. When QP balance is set for Memory Balance/Tax System Programming, enter 1 digit
from 0 to 4 for applicable tax status. When US balance is set, enter a maximum of 5
digits by combining 0 to 5.
QP balance US balance
0: Non-taxable 0: Non-taxable
1: Tax 1 (Tax 1 taxable) 1: Tax 1 (Tax 1 taxable)
2: Tax 2 (Tax 2 taxable) 2: Tax 2 (Tax 2 taxable)
3: Tax 3 (Tax 3 taxable) 3: Tax 3 (Tax 3 taxable)
4: Tax 4 (Tax 4 taxable) 4: Tax 4 (Tax 4 taxable)
5: Food stamp
5. Enter 2-digit of Department Code to which the PLU is linked. When the PLU is newly
programmed, this entry is compulsory. (This entry can be skipped, however, an error
occurs when the PLU is entered in REG mode. Therefore, this entry is compulsory.)
When linked to HASH Department, a PLU will be HASH PLU. When a linked
department is processed by single item, a PLU is also processed in the same way.
6. HALO digit/LALO digit
HALO (High Amount to be Locked Out) LALO (Low Amount to be Locked Out)
0: No limit 0: No limit
1: 1 digit (0 to 9) 1: 1 digit (1 to 9999999)
2: 2 digits (0 to 99) 2: 2 digits (10 to 9999999)
3: 3 digits (0 to 999) 3: 3 digits (100 to 9999999)
4: 4 digits (0 to 9999) 4: 4 digits (1000 to 9999999)
5: 5 digits (0 to 99999) 5: 5 digits (10000 to 9999999)
6: 6 digits (0 to 999999) 6: 6 digits (100000 to 9999999)
7: 7 digits (0 to 9999999) 7: 7 digits (1000000 to 9999999)
7. “00” indicates that no Link PLU exists.
8. In case the following conditions, pressing the [X/TIME] key adds the Check Digit value
to the code, resulting that the PLU No. will be generated automatically.
•
In case 7-digit-or-less values are entered.
•
In case 11-digit or 12-digit value is entered.
Enter 1 digit
from 0 to 4 for
applicable tax
status.
Enter a maximum
of 5 digits by
combining 0 to 5.