5
CONTROL PANEL LAYOUT
1.
LINE IN (RCA) Jacks
The RCA style input jacks are for use with source units that have RCA line level
outputs. A source unit with a minimum of 250mV is required for proper operation.
However, this input will accept levels up to 6Vrms.
2.
LINE OUT (RCA) Jacks
RCA style output jacks allow for a signal to be sent to other amplifiers.
3.
GAIN Control
This control is used to match the input sensitivity of the amplifier to the particular
source unit that you are using.
4.
BASS EQ Control
This equalization circuit is used to enhance the low frequency response of the vehicle’s
interior. With up to 18dB of boost centered at 45Hz, the BASS EQ can be adjusted to
meet your own personal taste.
Summary of Contents for GLADIATOR
Page 1: ......
