manualshive.com logo in svg

TEC EO1-11099, Owner'S Manual

Share
Download
TEC EO1-11099 Owner'S Manual Download Page 49

– 43 –

EO1-11113

RETURNED MERCHANDISE

DEPARTMENT ENTRY
PLU ENTRY
QUANTITY EXTENSION
SPLIT PACKAGE PRICING
SET MENU ENTRY
SINGLE-ITEM DEPARTMENT/PLU ENTRY

OPERATION

-- Receipt Print Format --

RTN
BAKERY           -1.45TF
RTN
CAN FOOD         -0.45TF

---

BOTTLE RETURN

| Bottle Return Amount | [BTL RTN]

| Quantity | [@/FOR] | Unit Amount | [BTL RTN]

max. 3 digit (integral value only)

NOTE:

•

Must not exceed the sale total amount.
(See REMARKS below.)

OPERATION

.... unless “Credit Balance” option is selected.

REMARKS: In using the [BTL RTN] key when the “Credit Balance”

option is not selected:

Bottle Return entry after a Department or PLU item

The bottle return amount must not exceed the preceding
Department or PLU item amount.

Bottle Return entry after a subtotal

The bottle return amount must not exceed the subtotal
amount.

(Operating the [BTL RTN] key after any other item ([%+], [%-], etc.)
than those above, an error will result.)

BTR              -0.05

-- Receipt Print Format --

     6X      0.05@
BTR              -0.30

[RTN MDSE]

Summary of Contents for EO1-11099















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands