1-2
1. UNPACKING
EO18-33002A
1.2 CHECKS
6) Remove the six pieces of tape to open the top cover and remove the rear pad.
7) Remove the 12 pieces of tape from the internal parts.
8) Turn all of the head levers to the OPEN position to open the pinch roller ass'y and remove the sheet
of paper protecting the print heads.
9) Turn all of the head levers to the LOCK position to close the pinch roller ass’y, then lower the pinch
roller lever to the ROLLER LOCK position.
10) Close the top cover.
NOTES: 1. Regarding attachment of the accessories, refer to the Owner's Manual.
2. The above illustration is for the CB-416-T3-QQ/QP model. Since the CB-426-T3-QQ/QP
model is a two-color printer, the two print head blocks to the right hand are not installed.
Please accept that all illustrations provided in this manual hereafter are for the CB-416-
T3-QQ/QP.
1.2 CHECKS
1) Check for damage or scratches on the machine.
2) Confirm that none of the accessories are missing.
NOTES: 1. Keep the cartons and pads for future transportation of the printer.
2. If the printer is to stand unused for a long period of time or if it is to be transported, be sure
to insert a sheet of paper under all the print heads and the pinch roller to protect the print
heads.
Tape
Tape
Tape
Rear Pad
Fig. 1-2
Tape
Tape
Pinch Roller Ass'y
Head Lever
Tape
Tape
Pinch Roller Lever
Fig. 1-3
Pinch Roller
CB-416: Print Head (Yellow)
CB-426: 2nd Print Head
CB-416: Print Head (Cyan)
CB-426: 1st Print Head
CB-416: Print Head (Magenta)
CB-426: Not installed
CB-416: Print Head (Black)
CB-426: Not installed
