19
Level adjusting
Once in its permanent operating position, check that the dryer is absolutely level with
the aid of a spirit level. If it is not, adjust the feet with a tool.
Power supply connection
1.
Make sure that the voltage of the power supply is the same as the
electric specification of the dryer.
2.
Please do not connect it with the power connection board, the universal plug or socket
5. Attention &Advice
Attention
Leave it to stand for 2 hours after transporting. Before first use, please use the soft fabric to clean
the inside drum.
a)
Put some clean rags into the drum.
b)
Plug the power.
c)
Select the
【
Time
】
Program, press
【
】
button.
d)
After finishing this program, please follow the “cleaning and routine maintenance” to clean the
filter door.
During drying, the compressor and the water pump generate some noise, which is entirely normal.
Advice
1.
Before drying, thoroughly spin the laundry in washing machine. High spin speed can reduce
the drying time and save energy consumption.
2.
For uniform drying result, sort the laundry according to fabric type and drying program.
3.
Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4.
Do not over dry the clothes, because over dried clothes can easily get creases or shrinkage.
5.
Do not dry the articles containing rubber or similar elastic materials such as raincoats, bicycle
covers and feather products.
6.
The door can be opened only after the program of the drying machine is completed. Do not
open the door before the program finished, as the skin may be scalded by steam or hot surface.
7.
Clean the lint filter and empty container after each use to avoid extension of drying time and
energy consumption.
8.
Do not dry these clothes after dry-clean process
9.
The weight references as follows:
Summary of Contents for TTHD-7
Page 8: ...8 6 Anv ndning Kontrollpanel...
Page 13: ...13 11 Programtabell...
Page 20: ...20 6 Operation Control Panel...
Page 25: ...25 11 Program table...
