General
Unpack the heater carefully and retain the packaging for possible future use, such as moving or returning the
fireplace to your supplier.
The fireplace incorporates a flame effect, which can be used with or without heater so that the comforting effect
may be enjoyed at any time of the year. Using the flame effect on its own only requires a small amount of
electricity. Before connecting the heater, check that the supply voltage is the same as that stated on the heater.
Electrical connection
WARNING – THIS APPLIANCE MUST BE EARTHED
This heater must be used on A/C supply only and the voltage marked on the heater must correspond to the
supply voltage.
Before switching on, please read the safety warnings and operating instructions.
WARNING:
Electrical outlet wiring must comply with local building codes and other applicable regulations to
reduce the risk of fire, electrical shock and injury to persons.
WARNING:
Do not use this fireplace insert if any part of it has been under water. Immediately call a qualified
service technician to inspect the fireplace and replace any part of the electrical system which has been under
water.
Locating Your Fireplace
When choosing a location for your new fireplace, ensure that the general instructions are followed.
Also, for best effect, install the fireplace out of direct sunlight.
It is safe to set the fireplace insert close to non-combustibles .DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE.
Mantel installation
Please refer to the detailed instructions that come with the mantel that you purchased.
Specifications
PT-EF01-28-LED
Fireplace Insert dimensions
( w x d x h )
31.29" x 14.33"x 26.25"
79.5cm x 36.4cm x 66.7cm
Net Weight
Gross Weight
42.021bs / 19.1kg
47.31lbs / 21.5kg
Voltage
120V
Frequency
60 Hz
Watts / Amps
1400W / 11.6 A
Heater Rating
1300W