IMPORTANT INSTRUCTIONS
When using electrical appliances, the following basic precautions should always be followed to reduce the risk
of fire, electrical shock, and injury to persons:
1.
Read all instructions before using this heater.
2.
Although this unit is a zero clearance design, to prevent possible fire do not block air intake or exhaust in
any manner. Do not use on soft surfaces, such as a bed, where openings may become blocked.
3.
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the
heater is left operating and unattended.
4.
Always unplug heater when not in use.
5.
Do not operate any heater with a damaged cord or plug or after the heater malfunctions or has been dropped
or damaged in any manner. Return heater to authorized service facility for examination, electrical or
mechanical adjustment, or repair.
6.
Do not use outdoors.
7.
This heater is not intended for use in bathrooms, laundry areas or similar indoor locations. Never locate
heater where it may fall into a bathtub or other water container.
8.
Do not run power cord under carpeting. Do not cover power cord with throw rugs, runners, or the like.
Arrange power cord away from traffic areas and where it will not be tripped over.
9. To disconnect heater, turn controls to off, then remove plug from outlet.
10. Connect to properly grounded outlets only.
11. Do not insert or allow foreign objects to enter any ventilation or exhaust openings as this may cause an
electrical shock, fire or damage the heater
12. A heater has hot and arching or sparking parts inside. Do not use in areas where gasoline, paint, or other
flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may
cause fire , electrical shock or injury to persons .
14. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire.
However, if you have to use an extension cord, the cord shall be No.14ga minimum size and rated not less
than 1875 watts.
USER INSTRUCTIONS
1. Any repairs to this appliance should be carried out by qualified / authorized service personnel only.
2. Under no circumstances should this appliance be modified. Parts having to be removed for
servicing must be replaced with original “OEM” (original equipment manufacturers) parts only.
3. The firebox is to be cleaned with a damp cloth (water) only.
IMPORTANT:
Always unplug the power cord before cleaning the unit. Do not use any abrasive
cleaners on the unit.
4. Please unplug this fireplace when not in use.