bL - Backlight Contrast
The backlight contrast setting can be adjusted between 1 (one) and 3 (three)
with the
‘+’
and
‘-‘
buttons. To store the setting, press the
‘i’
button and
proceed to the next screen in the menu.
U - Unit of Measurement
This allows the user to select between miles and kilometres.
The
default
value is
2 - kilometres
. The value
1 represents miles
. The units
are also shown on the display.
General Parameter Setting Menu
From the
general
settings
menu, the
general
parameter
settings
menu can be
accessed by pressing the
‘-‘
and
‘i’
buttons for two seconds.
NOTE:
This menu can only be accessed whilst already in the general settings menu.
To
advance
a
screen
in the menu, use the
‘+’
or
‘-‘
buttons whilst the
black
text
is
flashing
. To advance a screen in the menu use the
‘i’
button when the
white
text
is
flashing
.
To
exit
the menu, hold the
‘i’
button for 2 (two) seconds.
Ld - Wheel Diameter
The bicycle wheel diameter can be adjusted by pressing
‘i’
whilst
‘Ld’
is flashing on screen. The wheel diameter will
begin to flash, and can be adjusted with the
‘+’
and
‘-‘
buttons as desired. If the wheel diameter is already
flashing, it can be adjusted immediately with the
‘+’
and
‘-‘
buttons.
LS - Speed Limit
The
maximum
speed
of the
electrical
system
(only)
of
the bicycle can be adjusted by pressing
‘i’
whilst
‘LS’
is
flashing on screen. The speed limit setting will being to
flash, and can be adjusted with the
‘+’
and
‘-‘
buttons as
desired. If the speed limit setting is already flashing, it can
be adjusted immediately with the
‘+’
and
‘-‘
buttons.
