Tebas INVERTER S User Manual Download Page 3

- 3 -

Warning

Please read this manual carefully before using the device.

Symbols used

Product safety

The framed content indicates product safety guidelines.

User safety

This symbol, combined with text in a white field, indicates an important notice regarding your safety.

Authorized persons

Assembly, use, maintenance

This  device  is  not  intended  for  use  by  persons  (including  children)  with  reduced 

physical, sensory or mental abilities, or without adequate experience and knowledge, 

unless they are operated under supervision and have received appropriate guidelines 

for the use of the device by a person responsible for their safety.

Children must be supervised to ensure that they do not play with the device.

Product delivery and general conditions of use

The device and spare parts are transported at the recipient's own risk, regardless of the method of transport. If the 

recipient notices transport damage, he should note them in the delivery document and confirm their occurrence by 

sending the carrier by registered mail the details of the damage.

This heat pump is designed and intended for use in private swimming pools only.
Tebas is not responsible for the use of the pump in other installations.
These instructions are part of the heat pump described. Please read carefully before assembling and using the 
device its content and adhere to it.
Strictly follow all safety guidelines in this manual. Before establishing the connection, make sure that the pool heat 
pump is the correct size and is suitable for the pool.
Before making an electrical connection, make sure that the power cord meets the manufacturer's requirements. 
Before performing maintenance, service or repair, disconnect the product from the power supply.
The indicated activities may only be performed by qualified persons.
Tebas is not responsible for damages caused by failure to comply with the provided guidelines or errors in handling, 
assembly or use.
The heat pump must not be installed in a corrosive environment, near the sea, in places where it is exposed salt mist 
and in the vicinity of rooms containing chlorine or other corrosive chemicals.
This manual is subject to change without notice.

Summary of Contents for INVERTER S















Reviews: