background image

 

 

 

 

1. INTRODUCTION 

 

Wood stoves provide a comfortable and easy-to-use. These heating units combine 

pleasure with a fireplace view. It is an independent heating unit. 

The stove body is made of steel and the food heating chamber(for TKS-15) is made 

of Teflon or enamel coating. 

The ashtray is placed at the bottom of the product and a fire chamber is available. 

Chimney output is placed on the upper plate of the product. 

The product is highly efficient due to its physical structure. 

It has an automatic ash discharge system. 

There is an easy replaceable grid system. 

You have a wood stove with European Standards Quality Certificate. 

Please read the user manual, carefully. It includes information on product 

functions and easy-to-use information.  

Use of these information increases the product quality and extend its life. You can 

properly protect the fuel and the environment.  

Warranty of the product depends on the right use of installation and instructions 

as described in the guide. 

We recommend you to keep this guide in order to reach the information about the 

correct use of the stove at the beginning of every winter.  

2. GENERAL INFORMATION  

 

National Standards, European Standards, local regulations, construction 

regulations, fire protection and safety regulations must be observed.  

During the installation, one must contact a person who is authorized for the 

chimney. The authorized person shall check the shape of the chimney connection 

of the product in the prescribed directions. In addition, the product installation 

and installation connection must be made by an authorized person. Before 

Summary of Contents for TKS-12












Reviews: