Intended use
Documents which also apply
14
299-030200-TWD01
25.09.2015
3.2
Documents which also apply
3.2.1
Warranty
For more information on the warranty topic refer to the included CD-ROM or the website:
www.teamwelder.com.
3.2.2
Declaration of Conformity
The labelled machine complies with EC directives in terms of its design and
construction:
• EC Low Voltage Directive (2006/95/EC)
• EC EMC Directive (2004/108/EC)
In case of unauthorised changes, improper repairs, non-compliance with specified deadlines for "Arc
Welding Equipment
– Inspection and Testing during Operation", and/or prohibited modifications which
have not been explicitly authorised by TEAMWELDER, this declaration shall be voided. An original
document of the specific declaration of conformity is included with every product.
3.2.3
Welding in environments with increased electrical hazards
In compliance with IEC / DIN EN 60974, VDE 0544 the machines can be used in
environments with an increased electrical hazard.
3.2.4
Service documents (spare parts and circuit diagrams)
DANGER
Do not carry out any unauthorised repairs or modifications!
To avoid injury and equipment damage, the unit must only be repaired or modified by
specialist, skilled persons!
The warranty becomes null and void in the event of unauthorised interference.
• Appoint only skilled persons for repair work (trained service personnel)!
Original copies of the circuit diagrams are enclosed with the unit.
To obtain spare parts, please refer to the included CD-ROM or contact your local authorised dealer.
3.2.5
Calibration/Validation
We hereby confirm that this machine has been tested using calibrated measuring equipment, as
stipulated in IEC/EN 60974, ISO/EN 17662, EN 50504, and complies with the admissible tolerances.
Recommended calibration interval: 12 months
