22
5a.
In order to fix the co-sleeper to the parent’s bed in co-sleeping mode, use the attached pair of fixing belts
provided.
5b.
Tighten the loop by pulling the belts firmly.
5c.
Adjust the belts separately until the sleeper is firmly in contact with the parent’s mattress.
5d.
Store any excess of belts between the mattress and the base.
WARNING!
TO PREVENT A SUFFOCATION HAZARD FROM ENTRAPMENT, THE BEDSIDE SLEEPER SHALL BE PROPERLY
SECURED TO THE ADULT BED USING THE ATTACHMENT SYSTEM.
FAILURE TO USE THIS SECURING SYSTEM WILL ALLOW THE BEDSIDE SLEEPER TO MOVE AWAY FROM THE
ADULT BED AND COULD RESULT IN THE INFANT FALLING OUT OF THE BEDSIDE SLEEPER.
USE ONLY THE ATTACHMENT SYSTEM SOLD WITH THIS CRIB, DO NOT USE OTHER ATTACHMENT SYSTEM.
WARNING!
•
Before every use always check to make sure there is no space between the parent’s mattress and the
side of the sleeper.
•
If there is, pull the belts firmly to tighten until there’s no space and the permitted condition of use has
been restored.
•
Use of product is only permitted with beds and/or mattresses with straight sides, use of the product with
round mattress and or water bed is not permitted.
•
When the product is used in the bedside sleeper mode, it should always be fitted to the long side of
access to the bed, do not fix the product to the bed or bottom of the bed.
EN